Seat belt pad

(Code: 31SBP01001)

Soft Neoprene seat belt pad which is printable on one side only.

The overall size is 17 cm x 24 cm, the imprintable area is 11 cm x 22 cm. The pad folds to a 6 cm width using Velcro fastenings.

Order Number 
Seat belt pad  

Pressing instructions
Pre-press to remove any moisture in the fabric and then press for around 60-70 seconds at 195 centigrade using medium pressure.

We recommend that you run a line of heat tape down the edge of the area alongside the printable area so that you do not print directly onto the fabric of the pad (the non Velcro side). We would also suggest that you attach the transfer to the pad at the top and bottom (fold the tape over onto the reverse of the pad).