Err

Dae Ha HTV Stretch Metallic by the metre

(Code: 56SMM09110 DHS-09)
Colour :
5.95
Add to cart
Discount on quantity
From25
Discount10.08%

Dae Ha HTV Stretch Metallic by the metre
The unique Dae Ha CAD-cut version of stamping foil is great for both sporting and fashion designs as it stretches with your garment.
 
This stretch metallic film is very easy to cut and weed and suitable for application to virtually any textile. You can cut and weed incredibly fine detail in plain and patterns and once applied you would think it was screen printed.
 
Forget Cad Cut hot melt adhesive and separate foil - this is an ALL IN ONE film.
 
Superb elasticity, providing a very soft comfortable to wear finish.

An adhesive backing enables the most intricate designs and final registration.
 
Suitable for cotton, polyester, mixtures of polyester/cotton and polyester/acrylic, similar textiles and lycra.
Dae-Ha
  25+ 1+
All colours by the metre  5.35 5.95
 
We offer discounts on total orders of over 25 metres (colours can be mixed) from the Dae Ha Stretch Metallic range. The discounted amounts will be shown in your shopping cart.  

Also available in strips 29 x 50 cm for the Silhouette Cameo/Cricut and in strips 22.5 x 50 cms for the Silhouette Portrait.
We are authorised Silhouette distributors so check out our Silhouette page to see our range of these fantastic cutters!
APPLICATION INSTRUCTIONS
 
Cut your text or design in reverse and weed out excess film.

Set your heat press to 140C to 150C.

Apply medium and even pressure across your transfer.

Press for 7 seconds.

Peel the release liner when it is warm / cool, then press directly onto the transfer for 3 to 5 seconds using a cover sheet such as a sheet of silicon paper or a PTFE sheet.

All information is given as guideline. We always recommend that you perform a test cut and print prior to production.
 
WASHING INSTRUCTIONS
40C wool cycle. Do not tumble dry. Can be ironed inside out, on a low heat.
Roll Width  500 mm
Film Thickness 3 micron Stretch Metallic film. 60 micron hot melt adhesive. Tolerance +-8.5 microns
Storage Conditions Store in an upright position, away from direct sunlight. 10C to 25C
Layering No
Sublimation printable No