Err

Fabric topped mousemats

(Code: 31FMM01060)
Thickness :
£ 1.25
OUT OF STOCK
Discount on quantity
From2050100
Discount2.40%4.80%7.20%

Fabric topped mousematsVery good quality rubber backed mouse mats with white bonded polyester fabric surface and black rubber backing.

The mouse mats measure  25 x 19 cm and are available in two thicknesses - 4.5 mm and 6 mm.

The mousemats are suitable for dye sublimation printing, standard inkjet and laser printing.

You may find our 3m adhesive spray useful when pressing mousemats as it makes it much easier to keep your transfer in the correct position. Place the transfer face up, very lightly spray the mousemat with the adhesive, place the mousemat face down on the transfer in the correct position - you can then easily turn the mousemat over so that the transfer is on top and ready for pressing.

Order Number   
  Thickness  
   100+
   50+
   20+
    1+
31FMM01045
4.5 mm
0.89
 0.93
 0.96
0.99
31FMM01060
6.0 mm
1.16
 1.19
 1.22
1.25

Pressing instructions
50 seconds at around 190º centigrade. Medium pressure.