PictaLeather jewellery box

(Code: 37SGC15041)

Email to a Friend
Add to Favorites
Add to cart
PictaLeather jewellery box
Beautifully made PictaLeather jewellery box with soft fabric lining, this box makes a superb present whatever the occasion.

The top surface of the lid is plain white for dye sublimation printing, the printable area is approx 15.2 x 12.7 cm and the height of the box is 7.8 cm. 

Order Number

Download image Download images

Pressing instructions
To ensure that you only print onto the white area on top of the box we recommend that you run a line of heat tape around the side of the box lid (see image below).You will need to support the lid while pressing by making up a former to fit inside the lid - we used some mousemat material cut to size - any heatproof material would work as well.

Prepress the lid for around 10 seconds to remove any residual moisture.

Press the transfer for 55-60 seconds at 195 centigrade. Medium pressure.
 Pressing guide for PictaLeather jewellery box