The Transfer Press - the dye sublimation company
Site Map | Catalogues | FAQ/Ordering | Contact us | Home
  

 

 

*********** PLEASE READ ***********

If you have arrived at this page by following a
search engine link or a bookmark please note
that this is an old version of our web site.

We offer one of the widest range of dye
sublimation imprintables in the UK - all
at very competitive prices!

Please click here to go to our new home page!

 


CRAFT ROBO

For full details on the Graphtec Craft Robo please
follow the link above to our new web site.

 

Specifications
Drive method Stepping motor
Cutting range Maximum: 200 mm x 1000 mm (7.9 inch x 39.4 inch)
However, limited to film (media 0.1 mm (0.004 inch) or less in thickness, carrier sheet-included thickness of 0.3 mm (0.012 inch) or less)
Usable sheet width

A4 size supported
Loadable sheet width:
maximum - 260 mm (10.2 inch)
minimum - 210mm (8.3 inch) *
*However, this limitation does not apply if the carrier sheet is used
Operating speed 10 to 100 mm/sec (10 speeds in 10-mm/sec steps)
0.4 inch to 3.9 inch/sec (10 speeds in 0.4 inch/sec steps)
Loadable number of pens 1 piece.
Types of pens Dedicated Blade holder
General-purpose ball-point pen (only when the ball-point pen holder is used)
Media types that can be cut Vinyl sticker (except for highly luminous reflection sheets) Media 0.1 mm (0.004 inch) or less in thickness, carrier sheet-included thickness of 0.3 mm (0.012 inch ) or less Kent paper (157 g/m2)
Drawing paper, postcard
* Not all types of media can be cut.
Interface USB 1.1
Rated power supply Dedicated adapter, +24 V DC (1.875 A)

Power consumption

 25W (10W or less during standby)

Guaranteed operating environment
16 to 32 degrees C, 35 to 70% R.H. (Avoid condensation)

External dimensions (W×D×H) (mm)

 Approx. 368 x 160 x 105 (14.5 inch x 6.3 inch x 3.9 inch)
Weight Approx. 2.5 kg

 

System Requirements

The minimum system requirements to run the software are as follows:

Operating System Windows 98 Second Edition/Windows Me/Windows 2000/Windows XP
CPU Pentium III 600 MHz or higher Memory 128 MB or more (at least 256 MB recommended)
Monitor 1024 x 768 High colour
(True Colour recommended)
Mouse Windows compatible
Supported plotter (when cutting) Craft ROBO (CC100-20)
Supported printers (when printing) Windows-compatible printers (inkjet printers recommended)
 


The Transfer Press, 11 The Laurels,
Dunkeswell, Honiton. EX14 4RS
Tel 01404 892995    Fax 0870 460 6241  

All images copyright of Impulse Wear, Best Friends Pets, Wild Side,
The Transfer Press Ltd and Europa Leisure