|An inexpensive corner rounder which offers a quick corner rounding facility for plastic, aluminium and metal labels.
The table is effectively split into two halves, each containing 90 degree stops, in the angle of each is a hardened radius of either 6 mm or 4 mm. The punch has been ground to simultaneously marry both of these rounds when driven down by the cam actioned handle. The material to be rounded is slid from the left or right hand side positively into the stops, to leave an overhang which is sheared through by the punch to leave a clean corner of either 6 mm or 4 mm radius.
The table support column is mounted on a 5" X 5" steel plate with screw holes for bench fixing, although this will probably be unnecessary for most users. Overall height with handle upright 8" (205 mm) and weight 1.2 kg.