 |
Aluminium name badges
Good value name badges in a choice of four colous of dye sublimation imprintable aluminium. All these badges offer superb value for money and are supplied complete with adhesive badge pins.
|
| Order Number | Colour | Size | Price | | 22BWP60201 | White | 6 x 2 cm | 0.29 | | 22BWP60204 | MIrror Gold | 6 x 2 cm | 0.29 | | 22BWP60203 | Mirror Silver | 6 x 2 cm | 0.29 | | 22BWP60202 | Brush Silver | 6 x 2 cm | 0.29 | | 22BWP75251 | White | 7.5 x 2.5 cm | 0.38 | | 22BWP75254 | MIrror Gold | 7.5 x 2.5 cm | 0.38 | | 22BWP75253 | Mirror Silver | 7.5 x 2.5 cm | 0.38 | | 22BWP75252 | Brush Silver | 7.5 x 2.5 cm | 0.38 | | 22BWP85371 | White | 8.5 x 3.4 cm | 0.45 | | 22BWP85374 | MIrror Gold | 8.5 x 3.4 cm | 0.45 | | 22BWP85373 | Mirror Silver | 8.5 x 3.4 cm | 0.45 | | 22BWP85372 | Brush Silver | 8.5 x 3.4 cm | 0.45 |
|
|
|
|
|
 |
| Unisub plastic name badges
Unisub FRP plastic name badges for dye sublimation printing. Printable on one side only. Pins and magnet fixings are available separately - see below. |
| Order No | Shape | Size | 1000+ | 200-999 | 1-199 | | 20UNI05501 | Rectangle | 25 x 75 mm | 0.37 | 0.39 | 0.41 | | 20UNI05502 | Rectangle | 32 x 75 mm | 0.40 | 0.42 | 0.44 | | 20UNI05530 | Rectangle | 50 x 75 mm | 0.53 | 0.55 | 0.58 | | 20UNI05532 | Oval | 38 x 75 mm | 0.48 | 0.50 | 0.53 |
|
|
|
|
|
|
 |
Acrylic name badges
Acrylic name badges with white aluminium inserts for dye sublimation printing. Complete with fixing pin. Please note that inserts are sold separately. Badges take insert sizes of approx 50 x 35 mm and 70.5 x 45 mm.
|
| Order Number | | | 250+ | 50-249 | 10-49 | 1-9 | | 33BDG50350 | Acrylic name badge | 50 x 35 mm | 0.22 | 0.23 | 0.25 | 0.27 | | 22BDA50359 | White aluminium insert | 50 x 35 mm | 0.20 | 0.20 | 0.20 | 0.20 | | 33BDG71450 | Acrylic name badge | 70.5 x 45 mm | 0.33 | 0.34 | 0.36 | 0.38 | | 22BDA71459 | White aluminium insert | 70.5 x 45 mm | 0.38 | 0.38 | 0.38 | 0.38 | |
|
|
 |
| Badge magnets and pins
Magnetic badge fixing for aluminium and plastic name badges. One ABS encased plate with 2 round "rare earth" magnets and one zinc plated steel plate with pressure sensitive foam tape for attaching to badge. Safety badge fitting pin for all aluminium and plastic badges. 38mm rectangular pressure sensitive base, tabbed release paper, and high bond adhesive pad for attaching to badge.
|
| Order Number | Product | All Quantities | | 90BMG00002 | Badge magnet | 0.77 | | 90BPN00001 | Badge pin | 0.21 |
|
|
|
|
 | Printing instructions
Unisub plastic name badges - 60 seconds at 200º centigrade. Medium to high pressure. For more information on the pressing of Unisub products please see our Unisub Tips and Guidelines page.
Ensure that you remove any clear protective covering on the aluminium before pressing. 50 seconds at 190º centigrade. Low to medium pressure.
|
|
