Keyhanger Metal framed keyhanger with two insert ceramic tiles for dye sublimation printing. The metal frame is 11 x 22cm and it takes two 10.8 x 10.8 cm ceramic tiles which are included. There are two keyhole hanging slots on the back of the hanger.
Order Number
100+
25-99
1-24
24KHT02001
5.65
5.85
6.15
Printing instructions Ceramic insert tiles when printed face down we used 8 minutes at 200º centigrade for the example above.
We recommend printing with the transfer face up on the base of the press and the tiles face down onto the transfer paper. Place a sheet of plain paper over the tile to protect the heat platen. Printing with the tile face down into the rubber on the base of the press allows the transfer to mould into the edge curve of the tile which we believe produces a better finish.
