Guillotines

Corner rounder - 4mm and 6mm Ref: 03CRD00406 An inexpensive corner rounder which offers a quick corner rounding facility for plastic, aluminium and metal labels. The table is effectively split into two halves, each containing 90 degree stops, in the angle of each is a hardened radius of either 6mm or 4mm. The punch has been ground to simultaneously marry both of these rounds when driven down by the cam actioned handle. The material to be rounded is slid from the left or right hand side positively into the stops, to leave an overhang which is sheared through by the punch to leave a clean corner of either 6mm or 4mm radius. The table support column is mounted on a 5" X 5" steel plate with screw holes for bench fixing, although this will probably be unnecessary for most users. Overall height with handle upright 8" (205mm) and weight 1.2kg. Just £160.00 plus VAT Quantity:

Guillotine 8" cut Ref: 03GUL00203 Cost effective shears which can accurately cut PCB laminates, plastics up to 2mm thick and aluminium up to 1.5mm. Free access to the cutting area is prevented by heavy Perspex shielding extending along both sides of the blade. A safety latch is fitted to the pivot to prevent operation without it first being released and for positional accuracy the cutting bed is fitted with a rule which is recessed to assist in securing the PCB or sheeting whilst cutting. Overall height of only 57.5 cm and a footprint of 33.5 x 14 cm. The cutting bed is 11 cm wide from the blade although wider materials can be cut. Just £195.00 plus VAT Quantity:

Guillotine 12" cut Ref: 03GUL00305 Cost effective shears which can accurately cut PCB laminates, plastics up to 2mm thick and aluminium up to 1.5mm. Free access to the cutting area is prevented by heavy Perspex shielding extending along both sides of the blade. A safety latch is fitted to the pivot to prevent operation without it first being released and for positional accuracy the cutting bed is fitted with a rule which is recessed to assist in securing the PCB or sheeting whilst cutting. Will cut materials up to 305mm (12") and has a height of 67 cm and a footprint of 44 x 24.5 cm with a cutting bed 22.5 cm wide from the blade although wider material can be cut. Just £255.00 plus VAT Quantity:

Guillotine 18" cut Ref: 03GUL00457 Bench top shears with an 18" cutting capacity, suitable for cutting printed circuit board laminates, thin metal sheet and aluminium (1.5/2.0mm) and plastic labels. When the operating handle is lowered a spring loaded clamp is activated which holds the material securely during cutting, enabling cuts to be made with a minimum of effort. These shears are composed of an epoxy powder coated cast aluminium frame fitted with hardened and ground steel blades. With a clear acrylic front safety guard to protect the operator, whilst at the same time making it possible to see the blades so that the material to be cut can be aligned accurately. With imperial and metric edge scales and fully adjustable front and back stops for batch work. Just £520.00 plus VAT Quantity:

Guillotine 25" cut Ref: 03GUL00635 Bench top shears with a 25" cutting capacity, suitable for cutting printed circuit board laminates, thin metal sheet and aluminium (1.5/2.0mm) and plastic labels. When the operating handle is lowered a spring loaded clamp is activated which holds the material securely during cutting, enabling cuts to be made with a minimum of effort. These shears are composed of an epoxy powder coated cast aluminium frame fitted with hardened and ground steel blades. With imperial and metric edge scales and fully adjustable front and back stops for batch work. Just £995.00 plus VAT Quantity: